One of the most underrated advantages of EPS Cement Sandwich Panel office partitions is that they are 100 percent reusable, which lets you completely reconfigure your office layout multiple times without throwing away any building material. The correct disassembly process is very simple, and if you follow the steps carefully, you can reuse every single panel multiple times without any damage. First, turn off all power to the walls and remove all electrical outlets, network ports and fixtures from the panel surfaces. Next, carefully remove the joint sealant between adjacent panels using a thin flexible putty knife, taking care not to chip the edges of the cement outer layer. Then unscrew the fasteners that connect the panels to the top and bottom track channels, and carefully lift each panel out of the frame one by one. Stack the panels vertically on a flat soft surface, and wrap the edges with protective foam to prevent chipping during transport or storage. When you are ready to reuse the panels in a new layout, you only need to replace a small amount of new joint sealant, and the walls will be just as strong, soundproof and durable as they were the first time you installed them. Many companies have reused the same set of EPS Cement Sandwich Panels 3 or 4 times across different office locations, reducing their total partition material costs by more than 80 percent over 10 years.