Many DIY beginners worry that cutting EPS Cement Sandwich Wall Panel requires expensive industrial saws, but the truth is you can get a perfectly clean cut with basic household tools. The easiest way to cut a standard EPS Cement Sandwich Wall Panel is to use a regular carbide-tipped hand saw. First, draw a straight cutting line on the surface of the EPS Cement Sandwich Wall Panel with a ruler and pencil, then score a shallow groove along the line with a utility knife before you start sawing.

If you need to make a long straight cut on a large EPS Cement Sandwich Wall Panel, you can use a simple circular saw with a masonry blade. Set the saw depth to 2mm less than the total thickness of the EPS Cement Sandwich Wall Panel, so you will not cut all the way through at once. After you cut through the first cement layer and the EPS core, flip the panel over and cut the remaining cement layer from the other side. This two-step method will give you a completely clean, chipping-free edge on both sides of the EPS Cement Sandwich Wall Panel.

For small curved cuts or irregular holes on an EPS Cement Sandwich Wall Panel, a jigsaw with a bi-metal blade works perfectly. This method is ideal for making custom openings for electrical outlets, window frames, or decorative arches on your EPS Cement Sandwich Wall Panel. Remember to wear a simple dust mask when cutting, as the small amount of cement dust from the EPS Cement Sandwich Wall Panel can irritate your respiratory system temporarily.