The high-voltage power distribution room and transformer room in the factory are key safety protection zones that must be isolated from other ordinary production areas with high-performance partition walls, to prevent irrelevant personnel from accidentally entering and to block the spread of fire in case of electrical equipment failure, and EPS Cement Sandwich Panel fully meets all the requirements for this special safety isolation wall. The 4-hour fire resistance rating of the panel can effectively block the spread of fire caused by short circuit or transformer combustion, ensuring that the fire inside the power distribution room will not spread to the adjacent production workshop and cause larger property losses.

The high mechanical strength of the panel can resist accidental impact, and it will not be easily damaged even if a small accident occurs near the power distribution room. The non-conductive property of the panel also provides an extra layer of electrical isolation protection, reducing the hidden danger of electric shock accidents. Workers can easily cut the panel on site to reserve openings for cable trays, ventilation systems, and fire doors, which is very convenient for adapting to different power distribution room layout designs. Many industrial electrical safety inspection reports show that using EPS Cement Sandwich Panel as the isolation wall for factory power distribution rooms fully meets the requirements of local electrical safety codes, and it is far more cost-effective than building traditional concrete isolation walls. More and more factory electrical renovation projects now choose this panel to upgrade their old power distribution room isolation walls, greatly improving the overall electrical safety level of the entire plant.