Product Line
Product Feature
Green Wall MaterialUsing Class A Non-inflammability material, all of the index is zero including combustion index, heat dissipation index, flame index, smog index, etc. No radioactivity for A type decoration material and unlimited for the production, sale and application range. The green wall material is consisted of unique nicotinamide crystal molecular structure after high temperature and high pressure process with many silicate and calcium substances, with excellent stable performance.
Green Energy ConservationEffectively reduce the water and electricity, consumptive material, reduce the construction waste and dust pollution, shorten the construction period, greatly reduce the building activities and energy consumption for building use, reduce 50% civilized construction cost of the part project of branch company.
Green Construction WorkingGreatly improve the labor efficiency, reduce the site construction workers quantity, save the labor cost, realize the aim of energy conservation, saving land, saving water and environment protection. Reduce the dust, noise, pollution water, poison gas and construction waste.
Class A Environmental ProtectionUsing the class A non-inflammability and inorganic property materials. No radiation, no deformation, stable physical and chemical performances.
Specification
| Items | High Density Colored Fiber Cement Board for Exterior Siding | ||
| Executive Standard | JC/T412.1-2006 Fiber Cement Flat Sheets Part 1: Non-asbestos Fiber Cement Flat Sheets. JG/2T 369-2012 Non-load Bearing Fiber-reinforced-cement Sheet for Exterior Wall | ||
| Product Formation | Low alkali cement/high purity quartz sand/ perlite and other mineral fillers/plant fibers | ||
| Standard dimension (mm) | 2440×1220×9 | 2440×1220×12 | 2440×1220×15/18/20/24 |
| Density (g/cm3) | 1.4<D≤1.7 | ||
| Water Absorption % | ≤28 | ||
| Rate of Water Content % | ≤10 | ||
| Bulking Factor % | ≤0.25 | ||
| Rupture Strength (MPa) | ≥15 | ||
| Thermal Conductivity W/(m.k) | ≤0.25 | ||
| Freezing Resistance | After 25 freeze-thaw cycles, there was no rupture and stratification. | ||
| Water Impermeability | After 24 hours of inspection, there were no wet marks or water droplets on the opposite side of the board. | ||
| Environmental Protection Evaluation | 100% asbestos-free, non-hazardous substances | ||
| Radioactivity | Class A materials, with unrestricted range of production, sale and use in conformity with the Limits of Radionuclides in Building Materials(GB6566-2001) | ||
| Non-inflammability | Class A in-combustibility conforms to Classification for Burning Behavior of Building Materials and Products (GB8624) | ||
| Color, pattern and other size | Can be customized | ||
Applications
Carry Notice
Notice for Storage and Carry
1. The board materials must be put on the wood pallet/bracket in horizontal placement.
2. It is not allow to put the board materials at the place of fixed position.
3. Make a measure to prevent rain and snow weather if the board materials in outdoor circumstance.
4. Make sure to keep the board materials untouched the water or liquid substance directly at any time.
5. Lift up the two end of the board materials in carefully when carry them, keep the oblique angle of the board materials when move them.
6. Single people to carry and operate the board materials is prohibited, deformation handling of the board materials is not allowed too.
FAQ
1.Brand Positioning
A: Be the first choice of building board for international buyers.
2.Brand advantages
A: reasonable price
B: good quality
C: on time delivery
3.Product categories
A: Ceiling Board
B: Fireproof Board
C: Interior Wall Board
D: Exterior Wall Board
E: Floor Board
4. Are you manufacturer?
A: Yes, we are a factory founded in 2009 with oversea team for international service.
We have 4 production lines, yearly capacity can be 100,000 square meters.
5.Which port can you support?
A: any other China port you need.
6. What's your MOQ?
A: Most customers choose 1x20"GP as trial order. Small orders are also accepted.
7. What is your lead time/production time?
A: Within 15 working days after receiving deposit.
9. How is Hanmero brand?
Hanmero has:
A: Hanmero has:
15+ years: manufacture and R&D experience
20,000 square meters factory
Output capacity: 10 million square meters
10. What certifications do you have?
A: ISO9001, CE, ISO8001 certifications etc. 100% quality check before each shipment.
11. What is the Shipping Way?
A: By sea to your nearest seaport.
12. What kinds of fiber cement board you can provide?
A: Support fiber cement board, calcium silicate board, fiber cement siding board, colored cement board, lightweight composite wall panel, fireproof board, ceiling board, customized board etc.
13. What is the standard size?
A: 1220*2440mm, 3000*2440mm, thickness 5-24mm
14.Is it possible to customization for special size?
A: Yes, support to produce the special size if bulk order.
15. What is advantage of your fiber cement board?
A: –Surface: Polished treatment on surface
–Pakage: Loaded by pallet with good packing
–Asbestos free: 100% asbestos free
–Approved: CE, ISO9001, SGS, Test Report
16.Q16: Do you have samples?
A: –Yes, we can send you the sample for free, but the freight is collected.
About US
Wuhan Hanmero Building Materials Co., Ltd., established in 2009, has grown into a national high-tech enterprise specializing in green building system materials, integrated intelligent production lines, and holistic solutions for energy-efficient residential technologies. Headquartered in Wuhan, the company leverages the regional advantages and talent resources of Central China, with modern R&D and production bases in Jingshan and Macheng, Hubei Province. It possesses a complete system spanning material research, manufacturing, and technology export.
In terms of products and equipment, the company’s core businesses include:
Green Wall & Decorative Materials and Intelligent Production Lines:
Products such as Eps Cement Sandwich Panels, Expanded Clay Cement Wall Panels, Foamed Concrete Panels, Gypsum Hollow Panels, Gypsum Blocks, Flexible Tiles, WPC Wall Panels, SPC Flooring, and Wallpapers, along with automated production lines. The company offers customized design and complete line exports, enabling high-precision and low-energy consumption production.
Dry-Mix Mortar & Coatings and Complete Production Equipment:
Including rendering mortar, crack-resistant mortar, adhesives, lightweight gypsum plaster, self-leveling mortar, and eco-friendly interior/exterior wall coatings. The production lines are equipped with efficient dispersion, metering, and packaging systems. The products exhibit strong adhesion and high durability, widely used in both new construction and renovation projects.
HANMERO operates a professional R&D center dedicated to new materials and equipment. The team is led by engineers and doctors specializing in materials science, mechanical automation, and building structures. The company collaborates with numerous universities nationwide in industry-academia-research partnerships and has obtained over 60 patents. Some of its technologies and production lines have been exported to multiple countries along the "Belt and Road" initiative.
HANMERO has established a comprehensive pre-sales and after-sales technical service mechanism, providing customers with product selection, production line planning, installation and commissioning, operator training, and long-term maintenance support. Its products are certified with CE, ISO9001, ISO14001, and SGS, and are exported to more than 90 countries and regions, including the United States, the United Kingdom, Germany, Australia, Saudi Arabia, the UAE, Qatar, Russia, India, Vietnam, Nepal, Brazil, Uzbekistan, Kazakhstan, Azerbaijan, Nigeria, and Ghana. They are widely applied in residential buildings, hospitals, schools, shopping malls, office buildings, public structures, industrial plants, and new urban development projects.
Guided by the philosophy of “Green Construction, Empowered by Technology, Globally Shared,” the company continues to drive innovation and international application of energy-saving building materials, intelligent production lines, and integrated construction technologies, striving to become a globally leading green building system integrator and service provider.
